Parkesburg, PA
Products Fieldstone Veneer
Brandywine Quarry, Inc. is your direct source for natural fieldstone veneer in the Tri-State Area. We saw our fieldstone veneer in-house at our Parkesburg facility, giving you direct control over quality, inventory, and lead times. Available in traditional Building Stone thickness (3–6″) or lightweight Thin Veneer (approximately 1.5″), our real fieldstone veneer fits home exteriors, fireplaces, chimneys, columns, retaining walls, and more. Matching 90-degree outside corners are available for every fieldstone veneer style.
Brandywine Quarry, Inc. produces fieldstone veneer in both traditional Building Stone thickness (3–6″) and Thin Veneer (approx. 1.5″), sourced from quarries we trust and delivered throughout the Tri-State Area. Whether you’re a contractor speccing a project or a homeowner planning a weekend build, we have the right fieldstone veneer for your application.
Natural fieldstone veneer in the thickness that works for your project and your install method.
Building Stone, 3-6″ thick
Full-bed masonry thickness. Preferred by experienced masons and projects with traditional masonry specs.
Thin Veneer, approx. 1.5″ thick
The same real stone, sawn in-house to a lighter profile. No foundation ledge required. Faster to install. Looks identical to Building Stone once it’s on the wall.
Note for contractors and architects: If your project is specified for Building Stone but Thin Veneer meets the performance requirements, it often saves time and cost. Call us, and we’ll walk through it with you.
Delivery Throughout the Tri-State Area
We deliver fieldstone veneer and all stone products throughout the Tri-State Area. Materials are palletized and handled with care.
Most suppliers buy pre-cut stone and resell it. We don’t.
Consistent supply, accurate specs, and a team that knows the trade. We support single jobs and multi-job schedules.
Not sure which thickness or style is right for your project? We’ll walk you through it in plain terms before you order.
Here are answers to the questions we hear most often from contractors and homeowners about fieldstone veneer, thickness options, installation, and ordering from Brandywine Quarry, Inc.
Fieldstone veneer is 100% natural stone shaped for use on vertical surfaces, available in Building Stone thickness (3–6″) or Thin Veneer (approx. 1.5″). Both are real stone, not manufactured or concrete products. Fieldstone gets its character from the way it naturally forms in the ground, with varied shapes, textures, and tones that no manufactured product can replicate. Every piece is unique.
Building Stone refers to traditional full-bed masonry thickness, typically 3–6″ deep. Thin Veneer is the same stone sawn to approximately 1.5″. They look identical once installed. The difference is depth, weight, and installation method. Brandywine Quarry, Inc. offers both. If you’re a contractor working with old-school specs, we can supply full Building Stone thickness. If you’re a homeowner or working on a project where weight and speed of installation matter, Thin Veneer is worth a conversation.
Yes. All natural fieldstone veneer at Brandywine Quarry, Inc. is 100% natural stone. No molds, no concrete, no manufactured materials. Thin Veneer is sawn on-site at our Parkesburg facility from real quarried stone. Because we do our own sawing in-house, we’re not buying someone else’s pre-cut product and reselling it. You’re getting stone that we’ve sourced, processed, and stood behind ourselves.
Thin Veneer fieldstone veneer can be applied to framed interior and exterior walls, poured concrete, concrete block, brick, and failing stucco. No foundation ledge required. Your installer should confirm substrate prep for your specific application. One of the advantages of Thin Veneer over full Building Stone thickness is that it doesn’t require the additional structural support that heavier stone demands, which makes it a practical choice for both new builds and renovation projects.
Yes. We offer matching 90-degree outside corners for every Thin Veneer fieldstone veneer style, cut from the same stone. Installed corners give the appearance of full-thickness masonry. This matters more than most people realize. Without corners, the edge of a Thin Veneer installation reveals the 1.5″ cut, which breaks the illusion of full-depth stone. Our in-house corners solve that completely.
Yes. We deliver natural stone fieldstone veneer throughout the Tri-State Area. Materials are palletized and handled with care. Call (610) 857-4200 to discuss timing and logistics. We manage our own inventory, which means we’re not dependent on third-party suppliers for availability or scheduling. When you call us, you’re talking to the people who control the material.
Real fieldstone veneer is natural stone sawn to approximately 1.5″ thickness. Manufactured stone is a concrete product molded to resemble natural stone. They are not the same material. If authenticity matters, natural fieldstone veneer is the only real option. Beyond aesthetics, natural stone and concrete products age very differently. Natural fieldstone veneer weathers gracefully over time. Manufactured stone can fade, chip, and show its age in ways that real stone simply doesn’t.
Home exteriors, fireplaces, chimneys, columns, retaining walls, outdoor kitchens, fire pits, and interior accent walls. It works across both traditional and contemporary designs. The natural variation in fieldstone, its irregular shapes and earthy tones, makes it especially well suited for projects where you want texture and character rather than a uniform, polished look.